Advanced Ultra-Thin Hydrocolloid Band-Aid for Pressure Ulcers

Product Overview

l The surface is compounded with semi-permeable matte polyurethane film, and it can also be compounded with polyurethane foam to enhance the liquid absorption performance. Film thickness 0.02-0.025mm;

l Liquid absorption: more than 3 times its own weight;

 Liquid absorption capacity: 10 cm² dressing, 24h liquid absorption capacity should not be less than 1.0g, 48h liquid absorption capacity should not be less than 2.0g;

l PH5.7, acid and alkali resistance range PH3-PH12;

l The hygroscopic capacity and liquid absorption capacity can be adjusted according to clinical needs.

Advantage

l Superior absorption and exudate properties;

l Keep the wound moist, so that the wound heals, relieves pain, and reduce the frequency of dressing changes;

l Waterproof, breathable, block the invasion of external bacteria;

l Good elasticity and self-adhesion, easy to use and comfortable;

l The replacement frequency can be prompted according to the color change of the product;

l It is easy to tear off and does not stick to the wound surface, no secondary damage and minimizing pain.

Applicable Scene

All types of low to moderate exuding wounds

l epidermal damage;

l Pressure Ulcer Prevention and Stage I-II Pressure Ulcer Treatment;

l small area superficial burns;

l wound after surgery;

l Donor area wound;

l Granulation and Epitheligenesis in Chronic Wounds;

l Venous ulcers, phlebitis, lymphangitis, etc.;

l Plastic and cosmetic wounds.

Precautions

1. Before use, the wound surface should be thoroughly cleaned and the skin around the wound should be dried; 2. It should be selected the hydrocolloid dressing that is about 2 cm wider than the edge of the wound to ensure adequate adhesion to the skin; 3. If the depth of the wound exceeds 5mm, a suitable material should be selected to fill the cavity before using the hydrocolloid dressing; 4. Not suitable for wounds with a lot of exudate; 5. It is normal for the dressing to bulge and whitish after absorption and swelling. When the absorption is saturated, it is prompted to change the dressing; 6. In the early stage of using hydrocolloid dressings, sometimes it may be found that the wounds expand instead, which is caused by the decontamination effect of the dressings, which is a normal phenomenon; 7. As the hydrocolloid molecules fuse with the exudate in use, a gel is formed. Sometimes it looks like a purulent discharge, so it is mistaken for wound infection. At this situation, rinse with normal saline. 8. The use of hydrocolloid dressings sometimes produces a certain odor, which disappears after cleaning the wound with saline. 9. If there is leakage around the paste, please change the dressing immediately

Ultra-thin hydrocolloid dressing is made from medicalpressure-sensitive adhesive and CMC particles with elasticity.Average thickness 0.6mm, and min.thickness 0.3mm.

Product Detail

Feature：

1、Bacterial invasion will affect wound healing.

     Disposable hydrocolloid dressing blocks bacterial invasion and has a waterproof layer

     without affecting breathability.

2、Absorb exudate and promote healing

     The CMC component in the hydrocolloid patch will form a gel after absorbing exudate.

     The moist gel can promote wound healing.

3、Easy to remove and relieve pain

     The gel formed after hydrocolloid absorbs exudate will not adhere to the wound or cause                     

      secondary damage. It can reduce the pain of dressing change.